OR/14/044 Model development log

From MediaWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Terrington, R L, Shelley, C, and Ramos Cabrera, L. 2014. Model metadata report for the Leeds-Aire Valley 3D geological model. British Geological Survey Internal Report, OR/14/044.
  • All digital data were processed, prepared and imported into the GSI3D modelling software.
  • A generalised geological sequence was devised to best fit the deposits seen and recorded in the data collection phase and based on the DigMap 1:10 000 scale data available which was recorded into the GVS file for the modelling.
  • All borehole data were considered during interpretation.
  • At the end of interpretation a checking phase based on interrogation of a fence diagram of all cross-sections was performed.
  • Geological envelopes marking the extents of each geological unit were then created.
  • Final model calculation was performed with several iterative phases to get the best model calculation possible.
  • Model calculation is by triangulation of nodes from correlated geological units in cross-section lines, geological envelopes and DTM.

GSI3D models. Updates on:

GVS

LEEDS_V2_0.gvs

  • Same content as LEEDS_V1_0 but soil has been re‐positioned above the made ground.

LEEDS_V3_0.gvs

  • Same content as LEEDS_V2_0 but till has been re‐positioned above the glld.